AIR COMPRESSOR PARTS AND ACCESSORIES FOR SALE. Buy compressed air parts for your air compressor or dryer. Easy to shop website offering all replacement parts and accessories for all air compressor brands and top manufacturers such as Atlas Copco, ALMiG, Broomwade, Compair, Demag, Elmo Rietschle, Gardner Denver, Hanshin, Hitachi, Holman, Hydrovane, Ingersoll Rand, Kaeser, Sullair, Wilkerson Air Compressors. We carry and sell a full range of Air Compressors Parts including Air Filters, Air Hoses, Air Line Filters, Airends, Drive Belts, Dryers, Gas Turbine Air Intake Filters, Inlet Valves, Inline Filter Elements, Intercoolers, Lubricants, O Rings, Oil Filters, Oil Stop Valve Kits, Pressure Sensors, Pressure Switch, Seal Kits, Separator Elements, Service Kits, Solenoid Valves, Tanks, Temperature Sensors, Thermostatic Valves, Timers, Vacuum Pump Spare Parts, Valve Kits, And Other Air Compressors Parts and Compressed Air Replacement Parts and Accessories. We also have Used compressors and used air dryers and other used air compressor equipment for sale at low prices. We sell a wide selection of air compressor and compressed air parts and accessories for your convenience. In addition we offer Air compressor repair, service, inspection, installation and maintenance as well as airend overhauling and airend rebuild and repair. We sell Air Compressors air filter, oil filter, separators and service kits for sale. Atlas copco air compressors, ingersoll rand air compressors, air compressor air filter, air compressor oil filter, air compressor products, in line filter and air compressor lubricant for sale. Shop for all your Air Compressors and Compressed Air Parts here at the lowest prices ever. We rent air compressors anywhere in the middle east including Jordan, Syria, Lebanon, Saudi Arabia, Dubai, Iraq, Iran, Israel and Egypt. We offer the best prices in the middle east region and the whole world. We are an authorized distributor of Ingersoll Rand Products.
Home Page Company History Contact Information Offered Services Products & Solutions Parts & Accessories Air & Oil Filters Air Compressors Brands Air Compressors Type Used Air Compressors Systems Compressor Rental Middle East Air Compressors Rentals Jordan Latest News Preventive Maintenance Machine Installation Machine Servicing Machine Inspection Machine Air Audit Airend Overhauling Airend Repair Air Compressors Info Compressed Air Purification Air Compressors Advantages & Disadvantages Purchasing Guideline Care & Maintenance Ingersoll Rand Atlas Copco ALMiG Broomwade Compair Demag Elmo Rietschle Hydrovane Kaeser Sullair Belt Driven Centrifugal Dental | Medical Diesel Direct Drive Electric Industrial Low Pressure Medium Pressure High Pressure Oil Less | Oil Free Portable Reciprocating Rotary Screw Single | 2 Stage Vertical | Horizontal Air Filters Oil Filters Separator Elements Service Kits Inline Elements Lubricants | Oil Airends | Air Ends Air Line Filters Drive Belts Gas Turbine Air Intake Inlet Valves Intercoolers Oil Stop Valve Kits Pressure Sensors Pressure Switch Seal Kits Solenoid Valves Drain Solenoid Valves Tanks Temperature Sensors Thermostatic Valves Vacuum Pump Spares Valve Kits Filters in the Middle East Compressor Parts Middle East Filters In Jordan Compressor Parts In Jordan
Friday, June 21, 2024 2:51 PM
 

 

Service Kits

 

Service Kits

Developed and Built Specifically to fit the OEM bills of material

NPS offer an extensive range of service kit options for Atlas Copco, Ingersoll-Rand, Sullair, Wilkerson, Gardner Denver, Kaeser, Compair, Holman, Broomwade, Demag, Elmo Reischle, Hanshin and Hydrovane Brands of Air Compressors. All NPS service kits are direct replacements to the OEM kits and meet the ISO 9001 standards and requirements.

NPS can provide Separator kits, Preventative maintenance kits, Filter kits, Air and Oil filter kits, Check valve kits and Thermostatic valve kits including VSD ranges, in fact everything needed to fully service a compressor unit. Service Kits from NPS are available to fit your time interval service schedules.


Air Filters, Oil Filters and Separators

 

Air Filters, Oil Filters and Separators

Designs that meet the OEM required performance and specification

NPS Air and Oil filters and Separators are manufactured with the highest quality filtration and separation media. The filtration and separation media used ensures that NPS separators can be used with all and any types of oils (mineral, semi synthetic or fully synthetic)


 

In-Line Elements

 

In-Line Elements

Compatible with most manufacturers

NPS offer replacement filter elements for a number of manufacturers, including Atlas Copco, Ingersoll-Rand, Sullair, Wilkerson, Gardner Denver, Kaeser, Compair, Holman, Broomwade, Demag, Elmo Reischle, Hanshin and Hydrovane.

Our extensive range offers inline filter elements that can be used in a variety of industries. NPS filter elements include pre-filtering, general purpose, oil removal and activated carbon.


Lubricants

 

Lubricants

For Optimum Compressor Performance

From Mineral, Semi synthetic to Fully synthetic, Rotary screw, Rotary vane or Reciprocating, NPS have a lubricant that will meet your requirements and type of Air Compressor.

NPS offers a wide variety of lubricants and coolants for rotary screw, rotary vane, reciprocating, centrifugal or piston compressors that offer an excellent alternative to OEM lubricants. NPS can offer alternatives from our standard lubricant range and provides a veriety of alternatives for non standard lubricants.


Used Compressors
Used Dryers

 

Used Compressors

Used Compressors that have been tested & serviced are available

NPS has a variety of Used Compressors that are available. These compressors have been serviced and tested to ensure that they are in a good operating conditions.

 

To View A List of Used Compressors Available for Sale Please Click Here

 

 

Used Dryers

Used Dryers that have been tested & serviced are also available

NPS has a variety of Used Dryers that are available. These dryers have been serviced and tested to ensure that they are in a good operating conditions..

 

To View A List of Used Dryers Available for Sale Please Click Here


Airend Overhauling Facility

Airend Overhauling Facility

Guaranteed Airend Rebuilding

National Plant Sales specializes in rebuilding rotary screw airends for all air compressor brands. With such a high number of remanufactured airends in the field, NPS offers a reliable and reasonably priced alternative to factory exchange airends.

All of our rebuilds include new bearings, gaskets, seals, orings, rotor repair, oil pump rebuild, inlet valve rebuild and end plate repair as needed for your convenience. On direct drive units we also service the drive motor, clean & bake the windings and install new bearings and seals to ensure optimum performance.

All Airend Rebuilds come with our exclusive 1 or 2 year warranty.

 

Airend rebuild features:


Remanufactured to OEM Specs
Quick Turnaround Time
Sealing Strip Repair or Replacement
Keyway Repair
Rotor Shaft Repair
End Plate Repair
Dynamic Rotor Balancing
Drive Gear Sets in Stock
Teflon Rotor Coating
ASME Welders

 


What Is The Process The Airend Goes Through In A Rebuild?

  • Your airend is loaded off and taken immediately to the disassembly area which contains mounting stand, overhead crane and oil pit for collecting oil. A document is generated for disassembly, teardown and spec sheets. This document follows the airend through the entire rebuilding process to ensure accurate documentation.
  • Once the airend is disassembled, damage and measurements are recorded, and pictures are taken identifying the primary problem areas.
  • At this point a quote is written for the rebuild and submitted to the customer for approval.
  • The disassembled airend is then placed in one of the self-contained cleaning systems to be cleaned.
  • Once we receive the OK and Purchase Order number from the customer, all parts that require work are brought to different areas of the shop and the repairs begin. The front and rear covers will be metalized using the thermal ARC system, when finished depending on the size of the cover, its moved to either the 20" or 36" Blanchard grinder for finishing.
  • The front male rotor bearing journal is mounted and turned on a lathe and will also be metalized and ground according to specs.
  • The main bore area if damaged will be plated and bored on a vertical boring mill.
  • Seal strips are built up and re-cut on a custom jig.
  • Depending on the extent of the damage, the above work normally takes one to two days to complete.
  • All components are then rewashed and taken to the assembly area, where all the bearings, seals, gaskets, and related materials needed to complete the assembly are pulled from inventory.
  • Before assembly takes place all the bearing pockets, bores, and alignments are rechecked. The two rotors are then checked for proper balance and alignment.
  • The bearings are removed from the boxes and re-measured for proper fit before installing.
  • To insure that the manufacturer's specs are being met, the unit is continually measured and re-checked for accuracy
  • Upon completion all open ports are plugged with plastic caps and the inlet taped. The airend is now ready to be skid mounted and painted.
  • As units enter the shipping area all necessary shipping documents and start-up procedures are attached to the unit, and trucking details are arranged.
  • This whole process will normally take on the average 3 to 5 working days, depending on the size and degree of damage. We have setup our shop so the work flows through on a orderly path to insure that all our inspection steps and quality controls are adhered too.


We carry the following Air Compressors Parts and Accessories for your convenience...


We Supply Air Compressors Parts & Accessories for the following Brands

 

 

On-Time, On-Target & On-Budget

Doing Everything to Help You Operate More Efficiently & Effectively 

With a relentless commitment to innovation, quality parts, high value and delighted customer service, NPS-Jordan has become one of the leading non-OEM suppliers of compressor replacement parts and air systems accessories in the Middle East.



National Plant Sales is a long established global distributor and supplier of replacement consumable Parts and Accessories. The company was established in 1994 with an aim is to provide our clients with a comprehensive range of high-quality premium compressed-air parts for all makes & models of compressors.

We provides a full range of services from Brand New Compressor Solutions and Used Equipment to Service Kits, Oil & Air Filters, Separators, In-Line Elements, Lubricants, Airend Overhauling as well as other Compressed-Air Parts & Accessories.

NPS supplies complete air compressor solutions as well as air compressor parts & accessories to companies all over the region. We take pride in our quality service & discounted pricing with lead times to meet your requirements. We will do whatever it takes to earn your business.


Commitment to Customer Service

We strive to provide the best Customer Service for our clients on a 24-Hour basis.

We are constantly interested in improving our Customer Service that our clients receive, so we have asked our customers about their needs and what NPS can do to facilitate their aftermarket parts to improve their efficiency and performance. In order to keep up with the increased call and quotation volume, we have doubled our customer service team and expanded our field technicians by 50%.


Providing You with Premium Air Compressor Parts

We strive to deliver the best quality parts at the lowest price possible

We are committed to providing our customers with the Best High-Quality Premium Parts at the Lowest Possible Rates. We are constantly increasing our inventory levels and placing larger orders to be able to provide you with an even lower price on your parts.

Our level of stock is constantly being increased to handle the increasing number of orders placed. With our warehouses holding over 2,000+ parts on our shelves, we are ready to handle your any of your orders and deliver the parts on time. Our machine shop capabilities are second-to-none and we are able to provide you with the best Technical Support on a 24-Hour basis 7 Days a week.

If you have a need for any special machine parts, we will be glad to offer assistance and provide you with a competitive pricing on high-quality replacements.


A Dedicated Team of Professionals

We have the best professionals ready to serve you and provide you with the best service

Whatever your requirements are our knowledgeable and experienced Technicians and Team will go out of their way to assure your complete satisfaction with our products and services. You'll find that same dedication during your whole time that you are with us.

Over 17 years of experience has taught us a lot about this industry and provided us with the proper level of expertise to handle all your needs with a high level of confidence.